tams elektronik FD-R Basic.3 Manual page 44

English
Setting the Packet Time Out
Name
Packet Time
Out
Hint: If the decoder is supplied by a buffer circuit, the locomotive would continue running
unplanned after an emergency stop or a signal stop caused by switching off the track voltage.
To prevent this, you have to set a low value for the Packet Time Out (approx. 16) and switch
off the automatic switch-over to analogue operation in CV 29.
Page 44
No. Input values
(Default)
11 2 ... 255
(16)
Remarks and tips
Time period between the failure
of the digital signal and the
change to the alternative
operation (analogue operation).
Increasing the input value by
"1" extends the time period by
10 ms.
FD-R Basic.3