Table of Contents
Advertisement
English
4. Operation overview
4.1. Digital operation
The function decoder is a multiple protocol decoder, that can operate
with and automatically recognise both DCC or Motorola formats.
Number of
addresses
Speed level
modes
Programming
4.2. Analogue mode
The function decoder can also be used in analogue model railway
layouts run with an D.C. speed control, but not with an A.C. speed
control.
Automatic analogue recognition
When putting the vehicle on the rails the decoder recognizes
automatically if it is run in analogue or digital mode and sets the
corresponding operation mode. The automatic analogue recognition can
be switched off, e.g.
Page 10
DCC
127 basic addresses or
10.239 extended
addresses
14, 28 or 128
configuration variables
(direct programming,
DCC conform)
or POM (programming
on main = main track
programming)
FD-R Basic.3
Motorola (MM)
255
14
registers
Advertisement
Table of Contents
