tams elektronik FD-R Basic.3 Manual page 15

FD-R Basic.3
each DCC command directed to any vehicle decoder. Channel 1 can be
set "dynamically", i.e. the decoder will only transmit its address in
channel 1 until a DCC command is directed to it. This frees the
channel for the messages of other decoders to which no command has
yet been sent or which are not yet known to the system.
In channel 2, vehicle decoders send their feedback as soon as a DCC
command is sent to their address.
Background information: Dynamic RailCom information
"Dynamic information" mean contents of CVs (RailComCVs 64-127)
which change during operation (e.g. real speed, reception statistics,
tank content). If needed, they are sent by the decoder spontaneously.
The reception statistics are kept by the vehicle decoder, and reported
as number of faulty data packages in relation to the total number of
data packages. These statistics allow conclusions on the transmission
quality between vehicle and rails.
The function decoder FD-R Basic.3 can send the following dynamic
RailCom information:

reception statistics
RailCom ® is a registered trademark of Lenz Elektronik GmbH. In order
to increase the readability of this text, we do without referring to this
with every use of the term RailCom.
English
Page 15