Possible Settings And Default Values - tams elektronik Multi-Decoder MD-2 Manual

Multi-Decoder MD-2

6.2. Possible settings and default values

CV
Operation
mode
(CV 39)
RailCom
(CV 28/CV 29)
Settings for connecting area 1
CV
Servo control
in rest
(CV 65)
Servo settings
(CV 40...63f)
Follow-up time
of servos
(CV 67)
Teetering
(CV 68/CV 69)
Velocity of
teetering
(CV 70...77)
Meaning
Operation mode 1
("servos + turnouts")
Operation mode 2
(" servos + push-buttons")
Channel 1 and/or 2 on / off
RailCom on / off
Meaning
Servo control commands are
switched off or sent further.
(to be set individually for each servo)
left / right stop,
servo velocity
(to be set individually for each servo)
0 ... 25,2 s
(to be set in common for all servos)
especially for semaphore
signals or railroad crossing
gates: yes/no
(to be set individually for each servo and
each direction of motion)
(to be set individually for each servo and
in common for both directions of motion)
Default value
Operation mode 1
RailCom on
Channel 1 and 2 on
Default value
For all 8 servos: servo
signals are switched
off as soon as the
servo has reached its
rest position.
500 ms
no
English
Page 25