Setting The Address - tams elektronik FD-R Basic.3 Manual

English

8.8. Setting the address

Name
Basic address
Tip: If a value higher than 127 is set for the basic address and the
use of extended addresses in CV 29 is set to off, the decoder does not
react to signals in DCC format!
Extended
address
Consist
address
Page 46
No. Input values
(Default)
1 1 ... 255
(3)
17 192 ... 255
(195)
18 0 ... 255
(232)
19 1 ... 127
(0)
Remarks and tips
Range of values:
in DCC format: 1 ... 127
in MM format: 1 ... 255
Only for DCC format.
Most central units permit
entering extended addresses
directly. The CVs 17, 18 and 29
are set automatically to the
proper values.
Address for consist operation
(multi-traction)
In DCC format only!
FD-R Basic.3