Table of Contents
Advertisement
Installing and Setting up the Machine > Network settings
Network settings
Configuring the Wired Network
The machine is equipped with network interface, which is compatible with network protocols such as TCP/IP (IPv4),
TCP/IP (IPv6), NetBEUI, and IPSec. It enables network printing on the Windows, Macintosh, UNIX and other platforms.
Set up TCP/IP (IPv4) to connect to the Windows network.
For other network settings, refer to the following.
Configuration Method
Configuring the Connection
from the Operation Panel on
This Machine
Configuring Connections on
the Web Page
Setting the Connection by
Using the Setup Utility of IB-
50
For other network settings, refer to the following.
[Network] (8-32)
NOTE
If user login administration is enabled, you can only change the settings by logging in with administrator
privileges.
If user login administration is disabled, the user authentication screen appears. Enter a login user name and
password, and select [Login].
The factory default login user name and login password are set as shown below.
Login user name
d-COPIA 255MF:2500
Login Password
d-COPIA 255MF:2500
NOTE
Ask your network administrator for the IP address in advance, and have it ready when you configure this setting.
The following cases, set the IP address of DNS server on the Embedded Web Server RX.
• When using the host name with [DHCP] setting set to [Off]
• When using the DNS server with IP address that is not assigned by DHCP automatically
Setting the IP Address of the DNS Server, refer to the following:
Embedded Web Server RX User Guide
1
Display the screen.
[System Menu/Counter] key > [System/Network] > Enter a login user name and password > [Login] > [Network] >
[Wired Network Settings] > [TCP/IP Settings] > [IPv4 Settings]
Use Quick Setup Wizard when configuring the network in a wizard-
style screen, without setting individually in System Menu.
For the equipped network interface, the connection can be set by
using Embedded Web Server RX. For the optional IB-50, the
connection can be set by using the dedicated Web page.
This is the setup tool included in the CD of IB-50. You can use it on
Windows.
Description
2-13
Reference Page
Quick Setup Wizard (2-
25)
Embedded Web Server
RX User Guide
IB-50 Operation Guide
IB-50 Operation Guide
Advertisement
Table of Contents
