Table of Contents
Advertisement
Preparation before Use > Login/Logout
Login/Logout
If you are setting a function that requires administrator rights, or if user login administration is enabled, you must enter
your login user name and login password.
NOTE
The factory default login user name and login password are set as shown below.
Login user name
d-COPIA 255MF:2500
Login password
d-COPIA 255MF:2500
You will be unable to login if you forget your login user name or login password. In this event, login with
administrator privileges and change your login user name or login password.
Login
1
Enter the login user name and login password to login.
1
If this screen is displayed during operations, select [Keyboard] of "Login User Name" to enter the login user
name.
Enter login user name and password.
Login User Name
Login Password
Character Entry Method (12-11)
2
[Login Password] > Enter the login password > [OK]
NOTE
If [Network Authentication] is selected as the user authentication method, authentication destinations are
displayed and either [Local] or [Network] can be selected as the authentication destination.
To authenticate by ID card, select [ID Card Login].
2
Select [Login].
10:10
Keyboard
Keyboard
Login
3-14
Advertisement
Table of Contents
