Table of Contents
Advertisement
System Menu > [System/Network]
[Protocol Settings]
Menu Transition: [System Menu/Counter] key > [System/Network] > [Network] > [Protocol Settings]
Configure the protocol settings.
Item
NetBEUI
Protocol Settings
Available Network
(Wi-Fi Direct)
Available Network
(Wi-Fi)
Available Network
(Wired Network)
LPD
Protocol Settings
Available Network
(Wi-Fi Direct)
Available Network
(Wi-Fi)
Available Network
(Wired Network)
SMTP (E-mail TX)
POP3 (E-mail RX)
FTP Client (Transmission)
FTP Server (Reception)
Protocol Settings
Available Network
(Wi-FiDirect)
Available Network
(Wi-Fi)
Available Network
(Wired Network)
SMB Client
(Transmission):
Selects whether to receive documents using NetBEUI.
Value: Off, On
Select whether or not each network is enabled.
Value:
Disable, Enable
NOTE
This setting is displayed when the [Protocol Settings] setting is [On].
Selects whether to receive documents using LPD.
Value: Off, On
Select whether or not each network is enabled.
Value: Disable, Enable
NOTE
This setting is displayed when the [Protocol Settings] setting is [On].
Select whether to send E-mail using SMTP.
Value: Off, On
Select whether to receive E-mail using POP3.
Value: Off, On
Select whether to send documents using FTP. To use the Thin Print protocol, set the
protocol to [On]. The default port number is 21.
Value: Off, On
Select whether to receive documents using FTP.
Value: Off, On
Select whether or not each network is enabled.
Value: Disable, Enable
NOTE
This setting is displayed when the [Protocol Settings] setting is [On].
Select whether to send documents using SMB. To use SMB, select [On] for this setting. The
default port number is 445.
Value: Off, On
8-40
Description
*1
*1
*1
Advertisement
Table of Contents
