Table of Contents
Advertisement
Installing and Setting up the Machine > Embedded Web Server RX
Embedded Web Server RX
If the machine is connected to the network, you can configure various settings using Embedded Web Server RX.
This section explains how to access Embedded Web Server RX, and how to change security settings and the host
name.
Embedded Web Server RX User Guide
NOTE
To fully access the features of the Embedded Web Server RX pages, enter the User Name and Password to log
in. Entering the predefined administrator password allows the user to access all pages, including Document
Box, Address Book, and Settings on the navigation menu. The factory default setting for the default user with
administrator privileges is shown below. (Upper case and lower case letters are distinguished (case sensitive).)
Login User Name: Admin
Login Password: Admin
Settings that the administrator and general users can configure in Embedded Web Server RX are as follows.
Item
Device Information
Job Status
Document Box
Address Book
Device Settings
Function Settings
Network Settings
Security Settings
Management
Settings
*1 The logged in user may not be able to configure some settings, depending on the user permissions.
NOTE
The optional FAX Kit is required in order to make use of fax functionality.
Here, information on the FAX settings has been omitted.
FAX Operation Guide
Accessing Embedded Web Server RX
1
Display the screen.
1
Launch your Web browser.
Description
The machine's structure can be checked.
Displays all job information, including print and scan jobs, storing
jobs, scheduled jobs, and job log history.
Add or delete document boxes, or delete documents within a
document box.
Create, edit, or delete addresses and address groups.
Configure the advanced settings of the machine.
Configure the advanced function settings.
Configure the network advanced settings.
Configure the security advanced settings.
Configure the advanced management settings.
2-42
Administra
General
tor
User
*1
*1
-
-
-
-
-
Advertisement
Table of Contents
