Olivetti d-COPIA 255MF Operation Manual page 402

User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration
2
[User Login Settings] > [Simple Login Settings] > [Simple Login Setup]
2
Enter the user information.
1
Select the key to which you want to register a user.
2
Select [ ].
System Menu/Counter.
Simple login settings - Simple Login Setup
01 None 02 None
04 None 05 None
07 None 08 None
Menu
\
3
To specify the user from local users, select [Local User]. To specify from network users, select [Network User].
The procedure differs depending on the transmission method selected.
Specifying the user from local users
Select the user to be set for simple login.
NOTE
• To sort the user list, select [Menu] > [Sort (Name)] or [Sort (Login User Name)].
• Select [Menu] > [Search(Name)] or [Search (Login User Name)] to search by account name or account ID.
Specifying the user from network users
System Menu/Counter.
Add - Network User
Login User Name
Login Password
Cancel
Select [Keyboard] of [Login User Name] and [Login Password], enter the information of the user to be registered, and
select [OK].
If you are specifying a user for whom a domain is set in network authentication, select the "Domain Name" and select the
domain where the user is registered.
Select [Next >].
NOTE
For details on entering characters, refer to the the following:
Character Entry Method (12-11)
4
Enter the user name to be displayed, select [Next >].
NOTE
For details on entering characters, refer to the information below.
Character Entry Method (12-11)
5
[Password Login] > [On] or [Off] > "Icon"
10:10
03 None
06 None
1/3
09 None
End
10:10
Keyboard
Keyboard
< Back Next >
9-23