Table of Contents
Advertisement
System Menu > [Report]
Item
Sub Address Box List
FAX List (Index)
FAX List (No.)
Outgoing FAX Report
Incoming FAX Report
Optional Network Status
[Admin Report Settings]
Menu Transition: [System Menu / Counter] key > [Report] > [Admin Report Settings]
This specifies whether an Outgoing FAX Report or Incoming FAX Report should be printed automatically.
FAX Operation Guide
[Result Report Setting]
Menu Transition: [System Menu / Counter] key > [Report] > [Result Report Setting]
Item
Send Result Report
E-mail/Folder
*1
FAX
Attach Image of
Network FAX
Canceled before
*2
Sending
Recipient
*2
Format
RX Result Report
Job Finish Notice
*1
Setting
*1 Displayed only when the optional fax function is installed.
*2 This does not appear when both [E-mail/Folder] and [FAX] are set to [Off].
This prints a report for fax functions.
FAX Operation Guide
NOTE
This function is displayed only on products with the optional fax function installed.
Prints the optional network status, allowing you to check the information including
optional network interface firmware version, network address and protocol.
NOTE
This function appears when the optional Network Interface Kit or Wireless Interface kit is
installed.
Automatically print a report of transmission result when a transmission is complete.
Automatically print a report of transmission result when E-mail or SMB/FTP transmission is
complete.
Value:
Off, On, Error Only
FAX Operation Guide
Select the attached image form Body and Cover Page when sending the Network FAX.
Value:
Body Text, Cover Page
Print a send result report if the job is canceled before being sent.
Value: Off, On
Select the Recipient Format for the send result report.
Value: Name or Destination, Name and Destination
*1
FAX Operation Guide
FAX Operation Guide
Description
Description
8-6
Advertisement
Table of Contents
