Table of Contents
Advertisement
User Authentication and Accounting (User Login, Job Accounting) > Setting an account. [Local]
Setting an account. [Local]
You can add, change and delete an account and set the restriction for each account.
Adding an Account [Accounting List]
Number of Allowable Accounts: 100
The following entries are required.
Item
Account Name
Account ID
1
Display the screen.
1
[System Menu / Counter] key > [User Login/Job Accounting]
NOTE
If the user authentication screen appears, enter your login user name and login password and select [Login].
For this, you need to log in with administrator privileges. The factory default login user name and login password
are set as shown below.
Login User Name
d-COPIA 255MF:2500
Login Password
d-COPIA 255MF:2500
2
[Job Accounting Settings] > [Accounting List] > [
2
Enter the account information.
1
Enter the account name > [Next >]
NOTE
For details on entering characters, refer to the the following:
Character Entry Method (12-11)
2
Enter the account ID > [Next >]
NOTE
Any "Account ID" that has already registered cannot be used. Enter any other account ID.
3
Activate or deactivate restriction.
Restricting the Use of the Machine (9-30)
4
Select [Register].
A new account is added on the Account List.
Number of characters: Up to 32
Allowable Input Range: 0 to 99999999 (up to 8 digits)
9-29
Description
]
Advertisement
Table of Contents
