Table of Contents
Advertisement
Operation on the Machine > Printing Data Saved on the Machine
Printing Document from Stored Job Box
In Stored Job, the print data sent from the application is saved to the machine. You can set up an access code as
necessary. If you set up an access code, enter the access code when printing. Print data will be stored in the Stored Job
Box after printing. This will allow printing of the same print data repeatedly.
1
Display the screen.
1
[Home] key > [Job Box]
2
Select [Private Print/Stored Job].
3
Select the creator of the document.
2
Print the document.
1
Select the document to print > [Print]
2
Specify the number of copies to print as desired.
3
Select [OK].
Printing starts.
NOTE
If the document is protected by an access code, the password entry screen will be displayed. Enter the
password using the numeric keys.
Deleting the Documents Stored in the Stored Job Box
1
Display the screen.
1
[Home] key > [Job Box]
2
Select [Private Print/Stored Job].
3
Select the creator of the document.
2
Delete the document.
1
Select the document to delete. > [
Document Box.
Job Box - Private Print/Stored Job
doc4100908135138
doc0100908134821
Menu
2
Enter the access code.
The document is deleted.
]
10:10
2014/10/10 10:10
2014/10/10 11:11
1/1
1
< Back
Print
2
5-41
Advertisement
Table of Contents
