Table of Contents
Advertisement
User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration
PIN Code Authorization
Select whether or not to use PIN Code Authorization.
NOTE
To select [Network], network authentication must be enabled and [Ext.] must be selected for server type.
Enabling User Login Administration (9-4)
1
Display the screen.
1
[System Menu / Counter] key > [User Login/Job Accounting]
NOTE
If the user authentication screen appears, enter your login user name and login password and select [Login].
For this, you need to log in with administrator privileges.
The factory default login user name and login password are set as shown below.
Login User Name
d-COPIA 255MF:2500
Login Password
d-COPIA 255MF:2500
2
[User Login Settings] > [PIN Login]
2
Configure the settings.
1
Select [Off] or [On].
2
Select [OK].
9-25
Advertisement
Table of Contents
