Sending A Fax After Specifying A Relay Station ([F-Code Tx]); Relay Distribution - Olivetti d-Color MF552 Fax Manual

4.6

Sending a fax after specifying a relay station ([F-Code TX])

4.6 Sending a fax after specifying a relay station ([F-Code TX])

Relay distribution

The Relay Distribution function sends a fax to a relay machine, which distributes the received fax to a pre-
registered group of destinations.
Overall communications costs can be reduced by grouping relay stations and destinations by area, com-
pared to the case in which faxes are broadcast to all destinations. This function is useful when broadcasting
faxes to distant locations.
Tips
- The destination machine (the relay machine) needs to have the F-code function.
- You need to check both the Relay User Box number specified on the relay machine and the password
for relay distribution.
- This function cannot be used together with the following functions:
– Password TX, Polling TX, Polling TX (Bulletin Board), Polling RX, Polling RX (Bulletin Board).
Related setting (for the administrator)
- You can enable or disable F-Code TX (Default: [ON]). For details, refer to page 11-25.
d
Reference
This machine can also be used as a relay station. For details, refer to [User's Guide: Box Operations].
d-Color MF552/452/362/282/222
4
4-11