SMC Networks EtherCAT EX260-VEC1 Operation Manual page 5

Operator
This operation manual is intended for those who have knowledge of machinery using
pneumatic equipment, and have sufficient knowledge of assembly, operation and maintenance
of such equipment. Only those persons are allowed to perform assembly, operation and
maintenance.
Read and understand this operation manual carefully before assembling, operating or providing
maintenance to the product.
■Safety Instructions
■Do not disassemble, modify (including changing the printed circuit board) or repair.
An injury or failure can result.
■Do not operate or set up with wet hands.
An electric shock can result.
■Do not operate the product outside of the specifications.
Do not use for flammable or harmful fluids.
Fire, malfunction, or damage to the product can result.
Verify the specifications before use.
■Do not operate in an atmosphere containing flammable or explosive gases.
Fire or an explosion can result.
This product is not designed to be explosion proof.
■If using the product in an interlocking circuit:
•Provide a double interlocking system, for example a mechanical system.
•Check the product regularly for proper operation.
Otherwise, malfunction can result, causing an accident.
■The following instructions must be followed during maintenance:
•Turn off the power supply.
•Stop the air supply, exhaust the residual pressure and verify that the air is released before
performing maintenance.
Otherwise, an injury can result.
Warning
-5-
No.DOC1048575-1