Table of Contents
Advertisement
S
S
UPER
ERVER 6013P-8+ Manual
10-cm Blower Fans
Figure 6-2.
System Cooling Fans (with optional front bezel shown)
6-4
Drive Bay Installation/Removal
Removing the Front Bezel
If your system has a front bezel (optional) attached to the chassis, you
must first remove it to gain access to the drive bays. To remove the bezel,
first unlock the front of the chassis then press the release knob (see Figure
6-3). Carefully remove the bezel with both hands. A filter located within the
bezel can be removed for replacement/cleaning. It is recommended that you
keep a maintenance log of filter cleaning/replacement, since its condition
will affect the airflow throughout the whole system.
6-4
Advertisement
Table of Contents
