Serial Ports; Atx Ps/2 Keyboard & Mouse Ports; Fan Headers; Glan1/2 (Ethernet Ports) - Supermicro SUPERSERVER 6013P-8 Plus User Manual

Serial Ports

The COM1 serial port is located
under the parallel port.
table on the right for pin defini-
tions. The COM2 connector is a
header on the serverboard (see
serverboard layout for location).
ATX PS/2 Keyboard and
PS/2 Mouse Ports
The ATX PS/2 keyboard and the PS/
2 mouse are located on J29. See
the table on the right for pin defini-
tions. (The mouse port is to the right
of the keyboard port. See Figure 5-
4.)

Fan Headers

The serverboard has three fan
headers. These are designated
CPU 1 Chassis Fan, CPU 2 Chas-
sis Fan and Chassis Fan 3. See
the table on the right for pin defini-
tions.

GLAN1/2 (Ethernet Ports)

Two Ethernet ports (designated
GLAN1 and GLAN2) are located
beside the VGA port on the IO
backplane. These ports accept
RJ45 type cables.
Chapter 5: Advanced Serverboard Setup
Pin Number
1
See the
2
3
4
5
Note: Pin 10 is included on the header but not on
the port.
5-15
Serial Port Pin Definitions
(COM1, COM2)
Definition Pin Number Definition
CD 6
RD 7
TD 8
DTR 9
Ground 10
PS/2 Keyboard
and Mouse Port
Pin Definitions
(J29)
Pin
Number Definition
1 Data
2 NC
3 Ground
4 VCC
5 Clock
6 NC
Fan H eader Pin Definitions
Pin
Number Definition
1 Ground (black)
2 +12V (red)
3 Tachometer
Caution: These fan headers
are D C power.
DSR
RTS
CTS
RI
NC