General Safety Precautions - Supermicro SUPERSERVER 6013P-8 Plus User Manual

S S
UPER ERVER 6013P-8+ Manual
! The power supply power cord must include a grounding plug and must
be plugged into grounded electrical outlets.
! Serverboard Battery: CAUTION - There is a danger of explosion if the
onboard battery is installed upside down, which will reverse its
polarities. On the X5DPR-8G2+, the positive side should be facing up.
This battery must be replaced only with the same or an equivalent type
recommended by the manufacturer.
according to the manufacturer's instructions.
! CD-ROM Laser: CAUTION - this server may have come equipped with
a CD-ROM drive. To prevent direct exposure to the laser beam and
hazardous radiation exposure, do not open the enclosure or use the
unit in any unconventional way.
4-2

General Safety Precautions

!
Follow these rules to ensure general safety:
! Keep the area around the SuperServer 6013P-8+ clean and free of clutter.
! The SuperServer 6013P-8+ weighs approximately 39 lbs (17.7 kg) when fully
loaded. When lifting the system, two people at either end should lift slowly
with their feet spread out to distribute the weight. Always keep your back
straight and lift with your legs.
! Place the chassis top cover and any system components that have been
removed away from the system or on a table so that they won't
accidentally be stepped on.
!
While working on the system, do not wear loose clothing such as
neckties and unbuttoned shirt sleeves, which can come into contact
with electrical circuits or be pulled into a cooling fan.
!
Remove any jewelry or metal objects from your body, which are
excellent metal conductors that can create short circuits and harm you
if they come into contact with printed circuit boards or areas where
power is present.
Dispose of used batteries
4-2