Supermicro SUPERSERVER 6013P-8 Plus User Manual page 26

S S
UPER ERVER 6013P-8+ Manual
Figure 2-5. Accessing the Inside of the SuperServer 6013P-8+
(with optional front bezel shown)
6. Check all cable connections and airflow:
Make sure all power and data cables are properly connected and not
blocking the chassis airflow. See Chapter 5 for details on cable connec-
tions. Also, check the air seals for damage. The air seals are located
under the blower fan and beneath the frame cross section that sepa-
rates the drive bay area from the serverboard area of the chassis.
2-8