Table of Contents
Advertisement
3-1
Overview
There are several LEDs on the chassis control panel as well as others on the
SCSI drive carriers to keep you constantly informed of the overall status of the
system as well as the activity and health of specific components. There are also
two buttons on the chassis control panel and an on/off switch on the power
supply. This chapter explains the meanings of all LED indicators and the appro-
priate response you may need to take.
3-2
Control Panel Buttons
There are two push-button buttons located on the front of the chassis.
These are (in order from left to right) a reset button and a power on/off
button.
RESET
!
RESET: The reset switch reboots the system.
!
POWER:
turn off the main system power. Turning off system power with this button
removes the main power but keeps standby power supplied to the system.
Chapter 3
System Interface
This is the main power switch, which is used to apply or
Chapter 3: System Interface
3-1
Advertisement
Table of Contents
Need help?
Do you have a question about the SUPERSERVER 6013P-8 Plus and is the answer not in the manual?