5-12 Installing Software Drivers - Supermicro SUPERSERVER 6013P-8 Plus User Manual

S
UPERSERVER 6013P-8+ User's Manual

5-12 Installing Software Drivers

After all the hardware has been installed you must install the software
drivers. The necessary drivers are all included on the Supermicro CD that
came packaged with your serverboard.
CD-ROM drive, the display shown in Figure 5-8 should appear.
display does not appear, double click on the "My Computer" icon and then
on the icon representing your CD-ROM drive. Finally, double click on the S
"Setup" icon.)
Figure 5-8
Click the icons showing a hand writing on paper to view the readme files
for each item. The bottom icon with a CD on it allows you to view the
entire contents of the CD.
Driver/Tool Installation Display Screen
5-24
After inserting this CD into your
(If this