Saddle Stitch Finisher Functions - Sharp AR-3551 Operation Manual

SADDLE STITCH FINISHER
Stapling capacity
Staples
Power supply
Dimensions
Weight
Name
1
Model*
Number of holes
Paper sizes for hole
punching
*1 Multiple punch modules cannot be installed together. Some models may not be available in some regions.
*2 With AR-PN1B, two or three holes can be punched depending on the paper size.
*3 With AR-PN1C and AR-PN1D, the number of holes is the same. The hole interval, however, is not the same.
Specifications are subject to change for improvement without notice.
Supplies
AR-SC2 staple cartridges must be used for this finisher. The cartridge package
contains three cartridges approx. 5000 staples each.

Saddle stitch finisher functions

■ Sort mode
Sorted sets will be delivered.
Original
■ Offset mode
Offset mode
5-18
8-1/2" x 11" or A4 or smaller size: 50 sheets*(20 lbs. or 80 g/m
8-1/2" x 14" or B4 or larger size: 25 sheets*(20 lbs. or 80 g/m
*Up to two sheets of 34 lbs. or 128 g/m
Upper tray: Single staple can be placed in the top left or lower left corners or two
staples can be centered on the left side.
Lower tray: 4-47/64" (120 mm) pitch from the center of paper
Requires the installation of an optional power supply unit (See page 1-8.)
28-9/32" (W) x 23-3/4" (D) x 39-3/8" (H) (718 mm (W) x 603 mm (D) x 1000 mm
(H))
Approx. 86 lbs. (39 kg)
Punch module
AR-PN1B*
AR-PN1A
2
11"x17", 8-1/2"x14", 3 holes: 11" x 17",
8-1/2"x11", 8-1/2" x 11", A3, A4
8-1/2"x11"R, A3, 2 holes: 8-1/2"x14",
B4, A4, A4R, B5, 8-1/2" x 11"R
B5R
Printouts
Non-offset mode
2 paper can be included as covers.
2
AR-PN1C*
3 or 2 4
A3, A4
■ Group mode
Groups of copies of the same page will be delivered.
Original
Sets will move from side to side so that each set or
group will be offset from the previous set or group
for easy separation.
Offset will function for non-stapled printer or copier
output, Non-offset can only be selected for copier
output.
Stapled sets will not be offset.
2 )
2
)
3 3
AR-PN1D*
4
11"x17", 8-1/2"x14",
8-1/2"x11",
8-1/2"x11"R, A3,
B4, A4, A4R, B5,
B5R
Printouts