Misfeed In The Duplex Module - Sharp AR-3551 Operation Manual

Misfeed in the duplex module

1
Unlatch the duplex module and slide it to
the left.
2
If the duplex module has an exit tray, rotate
it up out of the way and open the cover of
the duplex module.
3
While holding the exit tray up, remove the
misfed paper as shown in the illustrations
below.
4
Close the cover of the duplex module and
lower the exit tray.
Unlatch the unit and
gently move the module
away from the machine.
If no exit tray is attached,
just open the cover of the
duplex module and ignore
any reference to the tray
in the following steps.
If paper is misfed at the
upper part of the duplex
module, gently remove it
while taking care not to
tear the paper.
If paper is misfed at the
lower part of the duplex
module, gently remove it
while taking care not to
tear the paper.
MISFEED REMOVAL
5
Gently close the duplex module.
■ Misfeed in the bypass tray
1
Unlatch the duplex module and slide it to
the left.
2
Remove the misfed from the bypass tray.
3
Gently close the duplex module.
After closing the duplex
module, confirm that the
misfeed message has
been cleared and the
normal display appears.
Unlatch the unit and
gently move the module
away from the machine.
Be careful not to tear the
misfed paper during
removal.
After closing the duplex
module, confirm that the
misfeed message is
cleared and that the
normal display appears.
4-7
4