Misfeed in the duplex module
Pull out the duplex module.
1
Raise the exit tray and open the cover of
2
the duplex module.
While holding the exit tray up, remove the
3
misfed paper.
If paper is misfed at the upper part of the duplex
module:
If paper is misfed at the lower part of the duplex
module:
Close the cover of the duplex module and
4
return the exit tray.
Hold the knob and gently
open the module.
If the duplex module is not
equipped with an exit tray,
the operation concerning
the exit tray is not needed
(steps 2 to 4).
Gently remove the misfed
paper taking care not to
tear the paper.
Gently remove the misfed
paper taking care not to
tear the paper.
Gently close the duplex module.
5
Misfeed in the bypass tray
Remove the misfed from the bypass tray.
1
Open and close the duplex module to clear
2
the misfeed message.
MISFEED REMOVAL
After closing the duplex
module, confirm that the
misfeed message is
cleared and that the
normal display appears.
Be careful not to tear the
misfed paper during
removal.
4
4-7