G Xy Zoom; Xy Zoom - Sharp AR-M451N Operation Manual

REDUCTION/ENLARGEMENT/ZOOM

XY ZOOM

The XY ZOOM feature allows the horizontal and vertical copy ratios to be changed separately. The ratios can set
from 25% to 400% in increments of 1%.
Example: Selecting 100% for the length and 50% for the width
Original
1 Place the original in the document feeder
tray or on the document glass. (pages 4-3
to 4-6)
NOTE
When the original is placed in the document feeder,
the ratio can be set from 25% to 200%.
Touch the [COPY RATIO] key.
2
UTO 4
PAPER SELECT
100%
COPY RATIO
3 Touch the [XY ZOOM] key.
MENU
XY ZOOM
4 Touch the [X] key.
X 100
Y 100
ZOOM
4-18
Copy
The initial state of the [X]
key is selected
(highlighted), so this
step normally is not
necessary. Touch the
[X] key only if it is not
highlighted yet.
5 Use the reduction, enlargement, and
ZOOM ([ ], [
copy ratio in the horizontal (X) direction.
Y 10
64%
ZOOM
50%
XY ZOOM
X 50
Y
100
ZOOM
to touch the [ ]/[
automatically. After 3 seconds, the ratio will
change rapidly.)
NOTES
G Touch a reduction or enlargement key to set the
approximate ratio, then touch the [
increase the ratio or the [
ratio.
G Automatic changing of the ratio when a zoom key
is continuously touched can be disabled in the key
operator programs (see "Key operation setting
(prohibit key repeat)" on page 10 of the key
operator's guide).
6 Touch the [Y] key.
X 50
Y 100
ZOOM
]) keys to change the
A fixed ratio key will not
become highlighted
when touched.
Zoom ratios: Any ratio
from 25% to 400% can
be set in 1% increments.
Touch the [ ] key to
increase the ratio, or the
[ ] key to decrease
the ratio. (If you continue
] key, the ratio will change
] key to
] key to decrease the