quadient IS-420 User Manual page 50

5. Repeat the previous step for each piece of mail.
To quit the process at any time, press
In optional mode Differential Weighing Automatic Label
From the [Normal] home screen:
1. Place the stack of mail you to process on the weighing platform, and then follow
the instructions on the screen or the steps below.
2. Withdraw the first mail piece from the top of the stack. The Mailing System displays
weight and postage on the home screen, starts motors and prints the label
automatically.
3. Repeat the previous step for each piece of mail.
To quit the process at any time, press
When you remove the last object from the Weighing Platform,
the Mailing System will ask if you want to print it. You can
answer Yes or No.
If you inadvertently remove more than one item from the WP,
replace removed items on WP before weight stabilization to
avoid printing label (about 1.5 seconds).
When you remove the last object from the Weighing Platform,
the Mailing System will ask if you want to print it. You can
answer Yes or No.
If you want to seal the envelope, first engage the flap into the
moistener (option). Do not try to moisten self-adhesive envelopes.
.
.
3
45