quadient IS-420 User Manual page 49

Press
1.
Make sure there is enough labels are available in the label dispenser (see
the Label Dispenser
Press
2.
3
In optional mode Differential Weighing
From the [Normal] home screen:
1. Place the stack of mail to process on the Weighing Platform, then follow the
instructions on the screen or the steps below.
2. Withdraw the first mail piece from the top of the stack. The Mailing System displays
weight and postage on the home screen and starts motors automatically.
3. To print the imprint, insert the mail piece into the base against the rear-guide wall,
with the side to be printed facing upwards.
4. The Mailing System applies postage and the mail piece (or label) is sent to the
catch tray.
44
and enter the number of labels.
on page 65).
to print the labels.
If you want to seal the envelope, first engage the flap into the
moistener (option). Do not try to moisten self-adhesive envelopes.
If a mail piece is bigger than mail path maximum thickness, press
to print a label. The label is printed. To know the
maximum thickness, see Mail Specifications
Filling
on page 207.