quadient IS-420 User Manual page 40

2. Select Type and press [OK].
The Type of imprint screen is displayed.
3. Select the type of imprint in the list and press [OK].
The Imprint screen is updated and displays the menu items that allow you to
modify the imprint options.
Press
4.
Frequently Asked Questions
System check list:
Question...
Do I have enough postage?
Do I need to clear the Batch
Counter?
Is the sealing device properly
filled?
(if installed)
Is the Weighing Platform
properly zeroed or tared?
or to return to the home screen.
Answer
Press
To add credit, see
on page 71.
Clear batch counters if you intend to issue a report
on the mail run you are about to start (see
Data Report
Select Reset counter on the home screen, or see
How to Reset Batch Counters
For sealing while printing the envelopes.
For sealer-equipped feeders, see
Sealer Bottle
Before laying envelope(s) on the weighing platform,
your home screen should display 0 g. If _ g is
displayed, perform a 'rezero' of the WP.
See How to Rezero the Weighing Platform
147.
and enter 1 to check your credit balance.
How to Add Credit to the Meter
on page 102).
on page 188.
Batch
on page 64.
How to Fill the
on page
35
3