How To Implement Wiper Process; How To Clean The Print Heads Manually - quadient IS-420 User Manual

How to Implement Wiper Process

1. As supervisor (see
Press
2. Open the cover and remove the headset.
3. Press [OK] twice to start the carriage motor.
4. Check wiper and clean if necessary, then press [OK].
10
5. Check headset is back in replacement position and press [OK] to end test.
Manual Cleaning
If automatic cleaning is not sufficient, you can clean the printing heads manually.

How to Clean the Print Heads Manually

To clean the print heads manually:
1. Open the base cover.
2. Remove the ink cartridge (see
3. Clean the heads with a soft damp cloth.
184
How to Log in as Supervisor
and select the path:
How to Change the Ink Cartridge
on page 134):
Maintenance Cartridge Wiper Process
on page 185).