Audio; Sd Card - Idis DR-6100P Series Operation Manual

Part 2 - Configuration

Audio

Configure audio recording settings for all cameras
simultaneously.
● Audio Codec: Select an audio codec. (G.726, ADPCM
16KHz, G.711 u-Law or G.711 a-Law)
● Associated Audio In: Associates the selected audio
channel with the camera. It is supported by video
encoders only.
● Audio In: Select an audio input source (microphone
or line-in) and then adjust the volume.
● Audio Out: Adjust the volume.
Cameras do not feature built-in audio amplifier units
and therefore require the user to purchase a speaker
system with a built-in amplifier separately.
50

SD Card

If connection between the camera and NVR fails, the
video will be recorded on SD memory card of the
camera. When the connection is recovered again, the
recorded video on SD memory card will be recorded on
the NVR. The port number can also be entered using
the virtual keyboard. For more information on Smart
Failover, refer to the Smart Failover on page 54.
● Record: Configure this option to record the video on
SD memory card when the connection between the
camera and NVR fails.
● Recycle: When there is not enough storage available
on SD memory card, the oldest video will be deleted
automatically.
● Recorded Data: Indicates the time information of the
recorded data.
● Format: Click on this button to format the inserted SD
card. Formatting the SD card deletes alldata saved on
the card.
• This function is only supported for the cameras
supporting Failover recording of SD memory
card.
• For cameras is in use by third-party NVRs or the
newly registered cameras, the Format option
displays Other.