Checking Brush Holder Of Starter; Checking Armature Coil Of Starter; Checking Field Coil Of Starter - Kubota WSM 05-E4B Series Workshop Manual

4. ENGINE
6.45 Checking brush holder of
starter
Tools required
• Circuit tester
1. Check the continuity across the brush holder and
the holder support with a circuit tester.
NOTE
• If electricity flows, replace the brush holder
assembly.
Resistance be-
tween brush hold- Service specifi-
er and holder sup- cation
port
6.46 Checking armature coil of
starter
Tools required
• Circuit tester
1. Check the continuity across the commutator and
armature coil core with the resistance range of
circuit tester.
NOTE
• If electricity is out of service specification,
replace the armature assembly.
Resistance be-
tween commutator Service specifi-
and armature coil cation
core
4-76
Infinity
Infinity
2. Check the continuity across the segments of the
commutator with the resistance range of circuit
tester.
NOTE
• If electricity is out of service specification,
replace the armature assembly.
Resistance be-
Service specifi-
tween commutator
cation
and segment

6.47 Checking field coil of starter

Tools required
• Circuit tester
SERVICING
6. Servicing
Continuity
05-E4B SERIES,05-E4BG SERIES
KiSC issued 03, 2023 A