Structure Of Two Lever Type Fork Lever (For Bg Type) - Kubota WSM 05-E4B Series Workshop Manual

MECHANISM
1. Engine body
(1) Max. torque limiter
(6) Fork lever 1
(7) Floating lever
(8) Torque pin
(9) Fork lever 2
1.3.2 Structure of two lever type fork lever
(for BG type)
The engine speed of BG engine 1800 min
specification.
The fork lever assembly of BG series is consist of fork
lever 1 (3), fork lever 2 (4).
A slide plate is installed in fork lever 1. The governor
spring (5) is hooked to fork lever 2 (4).
The start spring is hooked to a slide plate, and holds
the control rack in the direction of full fuel position.
Fork lever 2 (4) and fork lever 1 (3) are installed with
the fork lever shaft (4).
05-E4B SERIES,05-E4BG SERIES
(10) Fuel limitation bolt
(a) Distance to which torque pin
(8) pushes fork lever 1 (6)
out
(b) Increase of fuel
-1
(rpm)
(1) Idle speed adjust bolt
(2) Slide plate
(3) Fork lever 1
4. ENGINE
(4) Fork lever 2
(5) Governor spring
(6) Fork lever shaft
4-3
KiSC issued 03, 2023 A