Fan Drive Pulley - Kubota D1503-M Workshop Manual

03-M-E3B, 03-M-DI-E3B, 03-M-E3BG WSM

Fan Drive Pulley

1. Lock the flywheel not to turn using the flywheel stopper.
2. Remove the fan drive pulley mounting nut (1) using 46 mm deep
socket wrench (3).
3. Remove the fan drive pulley (2) with gear puller (4).
4. Remove the feather key.
(When reassembling)
• Apply grease to the splines of coupling.
Fan drive pulley mounting
Tightening torque
nut
(1) Nut
(2) Fan Drive Pulley
S-58
DIESEL ENGINE
138 to 156 N·m
14.0 to 16.0 kgf·m
102 to 115 lbf·ft
(3) 46 mm Deep Socket Wrench
(4) Gear Puller
W1024348
KiSC issued 07, 2008 A