Handling Wire Harness - Kubota WSM 05-E4B Series Workshop Manual

2. GENERAL

8. Handling wire harness

CAUTION
• Do not let an unprotected wire harness to come
in contact with other components.
• Do not clamp the wire harness to fuel hoses.
• If the wire harness is damaged, replace it
immediately with a new one.
• Do not alter the electrical device and wire
harness.
• Tighten the electrical terminals securely.
(A) Good
• Check the electrical terminal protection and
clamping conditions before connecting the battery
cable.
(C) Covered completely with a
protection cover
• Keep the wire harness away from hazardous
positions such as rotating parts or high-temperature
sections.
2-4
(B) Bad: Loose bolt
GENERAL WORKING PRECAUTIONS
(D) Hazardous position
(E) Wiring position: bad
(F) Wiring position: good
• If wire harness is damaged or degraded, replace
immediately.
(H) Damaged
• Install the grommet securely.
(1) Grommet
(J) Good
• Clamp the wire harness securely. Do not damage
the wire harness by the clamp.
• Clamp the wire harness correctly. Do not slack,
twist, and pull.
8. Handling wire harness
(G) Hazardous position
(I) Torn
(K) Bad: poor installation
05-E4B SERIES,05-E4BG SERIES
KiSC issued 03, 2023 A