Operation; Led Indicators; Restart Pnozmulti - Pilz PNOZmulti Mini Operating Manual

Operation

7 Operation
7.1

LED indicators

The PNOZmulti control system is ready for operation when the "POWER" and "RUN" LEDs
on the base unit are lit continuously.
Legend
Basis
7.2

Restart PNOZmulti

The unit is in a STOP condition. Procedure for restarting the unit:
}
Press the pushbutton for between 4 and 8 seconds to restart the unit. Release the
pushbutton while the INFO LED flashes rapidly.
Operating Manual PNOZ mm0p-T
1002704-EN-02
LED on
LED flashes
LED off
Error
The existing user program has been deleted.
External error on the base unit, leading to a safe condi-
tion, e.g. chip card not inserted
External error on the base unit outputs, e.g. short across
the contacts, leading to a safe condition.
Internal error on the base unit
Internal error on the base unit (inputs)
Internal error on the base unit (outputs)
Base unit in a STOP condition
External error on the base unit inputs, which does not
lead to a safe condition, e.g. partially operated
External error on the base unit outputs, which does not
lead to a safe condition, e.g. feedback input defective
Base unit switches from a RUN condition to a STOP con-
dition or a new project is downloaded.
New project is present.
22