Carlton SP7015 TRX Owner's Manual page 69

 Next you will need to remove the
jackshaft sheave. Remove the bolts in
the jackshaft sheave and screw them
back into the empty threaded holes to
push the sheave off the bushing and
remove the bushing and sheave. Make
sure to keep all machine parts and
hardware together to make reassembly
easier.
 Remove the bolts holding the belt guard
onto the machine and remove the belt
guard.
 Then remove the engine sheave.
Remove the bolts in the engine sheave
bushing and screw them into the extra
threaded holes to push the bushing out of
the sheave and remove the bushing and
sheave.
 Remove the bolt holding the extended
grease fitting to the air filter bracket and
remove the extension from the stub
shaft.
SP7015 TRX SERVICING STUB SHAFT
REMOVE BOLTS
REMOVE
BOLTS AND
SCREW INTO
EXTRA HOLES
REMOVE
BOLTS AND
SCREW INTO
EXTRA HOLES
REMOVE BOLT
49