Grease engine slide and engagement handle
weekly. Use Texaco
TRACK TENSIONING
The tracks are tensioned by adding grease to the
tensioning cylinder. This is accomplished by
using a standard hand operated grease gun.
Each track has a grease fitting located beneath a
cover cap on the side of the track. Remove the
cap to access the tensioning grease fitting.
Install grease into the tensioning fitting using a
standard hand operated grease gun. It should
only take a few pumps of grease to tension the
tracks.
SP7015 TRX
Starplex II grease.
MACHINE MAINTENANCE
ENGINE SLIDE (6) AND ENGAGEMENT (2)
GREASE FITTINGS
GREASE FITTING
CAP COVER
GREASE
FITTING
28