ATTENTION:
®
The Carlton
Model SP7015 TRX Stump Grinder CAN be overturned on steep inclines.
This can cause serious injury to operator and machine. DO NOT OVERTURN!
P/N 0700024
Avoid steep side inclines when operating
this machine! The narrow design width
required in operating the model SP7015
TRX in tight confines makes it
susceptible to tipping over sideways.
Overturning this machine can result in
personal injury, property damage and/or
seizing the engine.
USE CAUTION.
Positioning the cutter wheel uphill and
as close to the ground as possible while
in transit will minimize the danger of
tipping over and maximize the
steadiness of the model SP7015 TRX.
When encountering a hill, the best
approach is straight up or straight down.
Avoid any side angles whenever
possible.
NEVER ALLOW INEXPERIENCED
PERSONS TO OPERATE THIS
MACHINE.
SP7015 TRX
SAFETY PRECAUTIONS
9