Setup; Individual Output; User Sound; Kit Copy & Exchange - Medeli MZ928 Owner's Manual

Setup

You can configure these settings in the Setup menu: individual output,
user sound, USB audio, factory reset, option, and MIDI settings.
1. Press the [SETUP] button, then use the [F2]/[F3] button, the [DATA]
dial or the [CURSOR] dial to select a sub-menu.
2. Press the [F4] or [SAVE/ENTER] button to enter the sub-menu. Or
press [EXIT] to go back to the previous menu.

Individual Output

You can specify the individual output jack for each pad.
1.
Press the [SETUP] button, then use the [F2]/[F3] button, the [DATA]
dial or the [CURSOR] dial to select "Individual". Then press the [F4]
or [SAVE/ENTER] button to enter this menu.
2.
Use the [CURSOR] dial to select a pad name. Then use the [DATA]
dial to change the setting.
Press the [F3] button to reset to the default settings. Press the [F4]
button to preview it.
Range
OFF, 1, 2, 1/2, 3, 4, 3/4, 5, 6,
5/6, 7, 8, 7/8

User Sound

In the User Sound menu, you can delete user sounds saved on the
module. When a user sound is deleted from the module, you will also
need to optimize it so as to free up this space.
Press the [SETUP] button, then use the [F2]/[F3] button, the [DATA] dial
or the [CURSOR] dial to select "User Sound". Then press the [F4] or
[SAVE/ENTER] button to enter this menu.
Deleting a user sound:
1.
Use the [CURSOR] dial to select a user sound that you want to de-
lete. Before deleting the user sound, you can press the [F4] button to
preview this sound.
2.
Press the [F3] button to delete this sound. The LCD will prompt "De-
lete the sound! Are you sure?". Press the [SAVE/ENTER] button to
confirm it, or press the [EXIT] button to cancel.
Optimizing a user sound slot:
1.
After deleting a user sound, you will need to optimize the slot so as
to free up the occupied space. Press the [F2] button to execute the
optimization.
2.
The optimization process will take some time to finish. During this
process, the LCD will show "The optimization time is a little long. Are
you sure?".
Notes:
After optimizing a user sound slot, you will need to reboot the module.
Kit Copy & Exchange
Press the [SETUP] button, then use the [F2]/[F3] button, the [DATA] dial
or the [CURSOR] dial to select "Kit Copy Exch". Then press the [F4] or
[SAVE/ENTER] button to enter this menu.
Kit Copy:
1.
Press the [F2] button to enter the Copy menu.
38
Description
Specify the individual output jack from
which the pad sound is output.