Table of Contents
Advertisement
Setup
1.
Press the [SETUP] button, then use the [F2]/[F3] button, the [DATA]
dial or the [CURSOR] dial to select "Option". Then press the [F4] or
[SAVE/ENTER] button to enter this menu.
Functions of the [F1] ~ [F4] buttons in this menu:
Buttons
Function
F1
Exit
F2
Global
F3
Bluetooth
F4
Control
2.
Use the [CURSOR] knob to select a parameter to edit. Then use the
[DATA] dial to change the setting.
Global menu:
Parameter
Range
Auto Power OFF OFF, 30 Minutes,
1 Hour, 3 Hours
LCD Brightness 1 ~ 32
UI Color
Yellow, Green,
Blue, White
Bluetooth menu:
Parameter
Range
BT AUDIO SW OFF, ON
BT MIDI SW
OFF, ON
BT Name
MZ920 MIDI,
MZ920 AUDIO
Pairing
...
Reset
...
Connecting and disconnecting Bluetooth:
1.
In the Bluetooth menu, press the [F2] button to start pairing. The LCD
will prompts "Pairing...".
If you press the [F1] button, it will exit from pairing and return to the
Bluetooth menu.
2.
When pairing is successful, it will return to the Bluetooth menu. The
Bluetooth logo will turn on and the LCD shows "Connected (Audio/
MIDI)", indicating Bluetooth is being connected.
3.
If you want to disable Bluetooth connection, press the [F3] button.
The Bluetooth logo will turn off and the LCD will show "Unconnected".
Notes:
When editing the Bluetooth parameters, Bluetooth transmission may
not work normally.
Control menu:
Parameter
Range
External1 Head
OFF, KIT+, KIT-, CHAIN+,
External1 Rim
CHAIN-, SONG+, SONG-,
START/STOP, XSTICK SW
External2 Head
OFF, KIT+, KIT-, CHAIN+,
External2 Rim
CHAIN-, SONG+, SONG-,
START/STOP, XSTICK SW
40
Description
Return to the Setup menu.
Set the Auto Off time, the LCD brightness.
Enter the Bluetooth menu.
Set the function of the EXT1 ~ 2 jacks.
Description
Set the time period after which the
module will shut down of inactivity.
Adjust the brightness of the LCD.
...
Description
Turn the Bluetooth audio on or off.
Turn the Bluetooth MIDI on or off.
The Bluetooth MIDI name and Blue-
tooth Audio name of the module.
Enable Bluetooth pairing and connect-
ing.
Disable Bluetooth connection, and
delete the pairing information
Description
Set the function of
the EXT1 jack.
Set the function of
the EXT2 jack.
Advertisement
Table of Contents
