Medeli MZ928 Owner's Manual page 24

Effect
Flange:
Parameter Range
Level 0 ~ 127
LFO Freq 0.1 ~ 8Hz
LFO Depth 0 ~ 127
Feedback -63 ~ +63
Phase Diff -180 ~ +180
Phaser:
Parameter Range
Level 0 ~ 127
LFO Freq 0.1 ~ 10Hz
LFO Depth 0 ~ 127
Feedback -63 ~ +63
Phase Diff -180 ~ +180
Overdrive:
Parameter Range
Level 0 ~ 127
Drive 0 ~ 127
Low Gain -12 ~ +12dB
LPF 1kHz ~ 22kHz
Output Level 0 ~ 512
Distortion:
Parameter Range
Level 0 ~ 127
Speak BYPASS, FD_112, BM_212,
MS_412
Drive 0 ~ 127
Volume 0 ~ 127
Low Gain -12 ~ +12dB
Mid Gain -12 ~ +12dB
High Gain -12 ~ +12dB
Enhance:
Parameter Range
Level 0 ~ 127
HPF Cutoff 0.5kHz ~ 16kHz Set the cutoff frequency of the HPF cutoff.
Drive 0 ~ 127
Auto Wah:
Parameter Range
Level 0 ~ 127
LFO Freq 0.1 ~ 20Hz
Depth 0 ~ 127
Cutoff 0 ~ 127
Resonance 1.0 ~ 12.0
24
Description
Adjust the effect level.
Adjust the LFO frequency.
Adjust the LFO depth.
Adjust the feedback level.
Adjust the phase difference.
Description
Adjust the effect level.
Adjust the LFO frequency.
Adjust the LFO depth.
Adjust the feedback level.
Adjust the phase difference.
Description
Adjust the effect level.
Adjust the drive level.
Adjust the low gain.
Set the cutoff frequency of the LPF.
Adjust the output level.
Description
Adjust the effect level.
Select the speaker type.
Adjust the drive level.
Adjust the volume level.
Adjust the low gain.
Adjust the mid-band gain.
Adjust the high gain.
Description
Adjust the effect level.
Adjust the drive level.
Description
Adjust the effect level.
Adjust the LFO frequency.
Adjust the depth of modulation.
Set the cutoff frequency.
Adjust the resonance level.