Setup Guide WARNING: Drum key can be pinched when adjusting clamps with drum key. Operate carefully. Be careful around pipe ends, inside the pipe and screw ends. Metal shavings, etc. May injure your fingers. Check the include items CYMBAL PADS BOX HI-HAT PEDAL BOX Cymbal Pad for Hi-Hat Cymbal Pad for Crash(with Choke)
Page 2
Set Up the Stand Left C ross P ipe Wing N ut Center Pipe (2) Pillar (L1) Pillar (R1) Pillar (M1) Cymbal R od C lamp Center P ipe (1) Wing N ut Right C ross P ipe 1.Attach the Center Pipe (2) to the clamp on the Pillar (L1) & (R1) 2.Attach the Left Cross Pipe to the clamp on the Pillar (M1) 3.Attach the Left Cross Pipe to the clamp on the Pillar (L1) 4.Attach the Right Cross Pipe to the clamp on the Pillar (R1) &...
Page 3
Attach the Parts Attach the Pads 1.Loosen the wing nuts on the drum pads. Tom 1 Tom 2 Wing Nut 2.Attach the drum pads to the pad mounts, and firmly tighten the wing nuts on the drum pads. Wing Nut 1 Snare Tom3 Wing Nut 1...
Page 4
Connect the Pads to the Drum Module Connection Procedure Make connections as shown in the illustration. Crash Ride Drum M odule Crash Ride Drum Module Hi-Hat Tom1 Tom2 Hi-Hat Tom 1 Tom2 Snare Tom3 Snare Tom3 Kick Hi-Hat Pedal HI-HAT C ontrol Kick P ad 1.Place the kick on the floor in the center of the rack as shown.