Layer Type - Medeli MZ928 Owner's Manual

Layer Type

You can set the type on how to layer the main and sub instruments.
There are 4 layer types.
1.
In the Sub Edit menu, press the [F3] button to turn on the Sub Layer
function.
2.
Use the [CURSOR] dial to select Layer Type, then use the [+]/[-] but-
ton or the [DATA] dial to change the setting.
3.
Strike the pad or press the [F4] button to preview the layer effect.
Layer type description:
Parameter Description
MIX The main and sub instruments are mixed
equally.
ADD Layer the sub instrument at the specified layer
point.
FADE The sub instrument will fade in at the specified
layer point.
SW (Switch) The main and sub instruments are switched at
the specified layer point.
DYNAM = striking velocity
VOL = response volume
M = main instrument
S = sub instrument
Instrument
[MIX] [ADD]
[FADE] [SWITCH]
19