Copy And Load Trigger Setting; Copy And Load Kit Chain; User Samples - Medeli MZ928 Owner's Manual

SD Card Function

Copy and Load Trigger Setting

1.
Press the [SD CARD] button, then use the [F2]/[F3] button, the [DATA]
dial or the [CURSOR] dial to select Trigger Setting.
2.
Press the [F4] or [SAVE/ENTER] button to enter this menu.
Copying trigger settings from the module to the SD card:
1.
Press the [F2] button to enter the Copy menu.
2.
Use the [DATA] dial or the [CURSOR] dial to select a trigger number.
There's only one set of trigger settings on the module, so you only
need to select a trigger number on the SD card.
3.
Press the [F4] or [SAVE/ENTER] button to save it to the SD card.
Note:
If this indicator "*" appears next to the number, it means this item is
blank.
Loading trigger settings from the SD card to the module:
1.
Press the [F3] button to enter the Load menu.
2.
Use the [DATA] dial or the [CURSOR] dial to select a trigger number.
There's only one set of trigger settings on the module, so you only
need to select a trigger number on the SD card.
3.
Press the [F4] or [SAVE/ENTER] button to load it to the module.

Copy and Load Kit Chain

1.
Press the [SD CARD] button, then use the [F2]/[F3] button, the [DATA]
dial or the [CURSOR] dial to select Kit Chain.
2.
Press the [F4] or [SAVE/ENTER] button to enter this menu.
Copying kit chain from the module to the SD card:
1.
Press the [F2] button to enter the Copy menu.
2.
Use the [DATA] dial or the [CURSOR] dial to select a kit chain, then
press the [F4] or [SAVE/ENTER] button to save it to the SD card.
Loading kit chain from the SD card to the module:
1.
Press the [F3] button to enter the Load menu.
2.
Use the [CURSOR] dial to move the cursor to the SD Card or the
Module. Then use the [DATA] dial to select a kit chain number.
3.
Press the [F4] or [SAVE/ENTER] button to load it to the module.

User Samples

1.
Insert the SD card to your computer. Then put the target user samples
to the folder "e-drum\Sample" on the SD card.
2.
Insert the SD card to the card slot of the module.
3.
Press the [SD CARD] button, then use the [F2]/[F3] button, the [DATA]
dial or the [CURSOR] dial to select User Samples. Press the [F4] or
[SAVE/ENTER] button to enter this menu.
36