Setup Guide WARNING: Drum key can be pinched when adjusting clamps with drum key. Operate carefully. Be careful around pipe ends, inside the pipe and screw ends. Metal shavings, etc. May injure your fingers. Check the include items CYMBAL PADS BOX HI-HAT PEDAL BOX Cymbal Pad for Hi-Hat Cymbal Pad for Ride...
Page 2
Attach the Parts Attach the Pads 1. Loosen wing nut on the holder clamp, which is on the center pipe、 (R). Side arm(L) and Side arm 2. Insert the Snare L-Metal Rod into the holder clamp on the Side arm(L),then insert the Tom&Module L-Metal Rod into the holder clamp on the Center Pipe and Side Arm , tighten wing nuts on the holder clamp.
Page 3
Connect the Pads to the Drum Module Attach the Drum Module Loosen wing nut on the clamp , wich is on the center pipe. 2. Insert the "L-Metal Rod" to the clamp 3. Insert the drum module to the L-Metal Rod Tighten the wing screw on the clamp.
Need help?
Do you have a question about the DD400 and is the answer not in the manual?
Questions and answers
hi, how to do factory reset