Trigger Check - Medeli MZ928 Owner's Manual

Trigger Settings

Trigger Check

You can check in real-time the XTalk status of the kit, the position sens-
ing of the snare, and the depth of the hi-hat control pedal.
Press the [TRIGGER] button, then press the [F4] button to enter the
Check menu.
XTalk Cancel:
Strike a pad. It will show the XTalk status of the affected pads.
For example, striking Tom 2 very forcefully. Suppose Crash 1 gets
affected by the vibration. In such a case, adjust the XTalk Cancel value
of Crash 1. Then strike Tom 2 to check again. Repeat this operation until
Crash 1 doesn't get affected by the vibration.
Snare Position:
Strike different areas of the snare pad. The LCD will show the striking
position.
Hi-hat Control:
Press the hi-hat pedal. The LCD will show how far the pedal is being
pressed.
31