Table of Contents
Advertisement
Mixer
In the Mixer menu, you can adjust the volume and the pan of each pad
and cymbal. These settings are part of the kit parameters. Don't forget to
save the settings after editing.
Adjusting the Volume of Each Pad
1.
Press the [MIXER] button to enter the Mixer menu.
Functions of the [F1] ~ [F4] buttons in this menu:
Function Range
Volume
0 ~ 127
Pan
L15 ~ CTR ~ R15 Adjust the pan (stereo position) of each pad.
Min Vol
0 ~ 15
Preview /
The abbreviation of each pad name:
Abbr.
1
2
Pad name Tom1
Tom2
Abbr.
C
C
Pad name Crash1
Crash2 Hi-Hat
2.
Strike the pad that you want to edit. Or use the [CURSOR] dial to
select a pad name.
3.
Use the [DATA] dial to adjust the volume level.
Note:
The volumes in the Mixer menu are separate from the volume faders
on the front panel. The sound you hear is the result of the mixer setting
multiplying the fader setting.
Adjusting the Pan of Each Pad
1.
Press the [MIXER] button, then press the [F2] button to enter the Pan
menu.
2.
Strike the pad that you want to edit. Or use the [CURSOR] dial to
select a pad name.
3.
Use the [DATA] dial to adjust the pan setting. You can press the [F4]
button to preview it.
Adjusting the Min Volume of Each Pad
1.
Press the [MIXER] button, then press the [F3] button to enter the Min
Vol menu.
2.
Strike the pad that you want to edit. Or use the [CURSOR] dial to
select a pad name.
3.
Use the [DATA] dial to adjust the volume setting. You can press the
[F4] button to preview it.
20
Description
Adjust the volume of each pad, including the
head and rim.
Set the minimum volume of each pad.
For example, if you set the snare to "14" (max.
is 15), even the softest hit will produce a rela-
tively big sound.
Note: Setting it to a high value will reduce the
dynamics of the sound.
Preview the sound volume.
3
4
S
Tom3
Tom4
Snare
H
E
E
Ext1
Ext2
K
R
Kick
Ride
F1
MIXER
F2
F3
F4
Advertisement
Table of Contents
