Effect; Selecting An Effect; Pad Compressor; Pad Eq - Medeli MZ928 Owner's Manual

In the Effect menu, you can adjust these effects: pad compressor, pad
EQ, kit reverb, kit IFX, kit EQ, and kit compressor.

Selecting an Effect

1.
Press the [EFFECT] button to enter the Effect menu.
2.
Use the [F2]/[F3] button, the [DATA] dial or the [CURSOR] dial to select
an effect, then press the [F4] or [SAVE/ENTER] button to enter the
sub-menu.
Note:
When an effect is turned off, the indicator at the left bottom of the effect
pane will disappear.

Pad Compressor

You can use the pad compressor to limit the peak of the sound level so
as to make the sound less likely to distort.
1.
Press the [EFFECT] button, then use the [F2]/[F3] button, the [DATA]
dial or the [CURSOR] dial to select PAD COMP. Then press the [F4] or
[SAVE/ENTER] button to enter this menu.
2.
In the Pad Comp menu, press the [F2] button to turn this effect on or
off. When Pad Comp is turned off, adjusting the parameters will not
apply to the instrument.
3.
Use the [CURSOR] dial to select a parameter, then use the data dial
to change the setting. You can press the [F4] button to preview the

effect.

Parameter Range
Trigger KICK, SNARE HEAD, SNARE
RIM, TOM1, TOM2 TOM3,
TOM4, HI-HATBOW, HI-HAT
EDGE, CRASH1, CRASH2,
RIDE, RIDE BELL, EXT1, EXT2
Preset Soft, Medium, Hard, Limiter
Type
PreGain 0 ~ 512
Threshold -64 ~ 0dB
Ratio 1:1 ~ 20:1
Attack 1 ~ 680ms
Release 5 ~ 680ms

Pad EQ

You can use the 3 bands EQ (Low, Mid, High) to adjust the sound of
each pad.
1.
Press the [EFFECT] button, then use the [F2]/[F3] button, the [DATA]
dial or the [CURSOR] dial to select PAD EQ. Then press the [F4] or
[SAVE/ENTER] button to enter this menu.
2.
In the Pad EQ menu, press the [F2] button to turn this effect on or off.
3.
Use the [CURSOR] dial to select a parameter, then use the [DATA] dial
to change the setting. You can press the [F4] button to preview the
effect.
Description
Select a pad or cymbal
name.
Select a preset compres-
sor type.
Set the pre-gain.
Set the signal level at
which the compressor
starts applying.
Set the compressor ratio.
Set the attack time.
The release time before the
effect completely stops.
Instrument
EFFEC T
F1 F2 F3
21