Kit Eq - Medeli MZ928 Owner's Manual

Tempo Wah:
Parameter Range
Level 0 ~ 127
LFO Freq 1/64T, 1/64., 1/32, 1/32T, 1/32., 1/16, 1/16T, 1/16., 1/8,
1/8_T, 1/8., 1/4, 1/4_T,1/4., 1/2, 1/2T, 1/2., 1/4*4, 1/4*5,
1/4*6, 1/4*7, 1/4*8, 1/4*9, 1/4*10, 1/4*11,1/4*12, 1/4*13,
1/4*14, 1/4*15, 1/4*16
Depth 0 ~ 127
Cutoff 0 ~ 127
Resonance 1.0 ~ 12.0
Pitch Change:
Parameter Range
Level 0 ~ 127
Pitch -24 ~ +24
Cent -100 ~ +100
Output 0 ~ 127
Feedback -63 ~ +63
Lo-Fi:
Parameter Range
Level 0 ~ 127
Sample Freq 1 ~ 256
LPF Cutoff 50Hz ~ 22kHz
Filter Type THRU, PWBAS,
RADIO, TEL,
CLEAN, LOW
LPF Resonance 1 ~ 12

Kit EQ

The module provides 4-band EQ for you to adjust the frequency re-
sponse. Kit EQ applies to the Line Output jacks and the Phones jacks.
Individual Output jacks will not be affected by the kit EQ.
1.
Press the [EFFECT] button, then use the [F2]/[F3] button, the [DATA]
dial or the [CURSOR] dial to select KIT EQ. Then press the [F4] or
[SAVE/ENTER] button to enter this menu.
2.
In the Kit EQ menu, press the [F2] button to turn this effect on or
off.
3.
Use the [CURSOR] dial to select a parameter, then use the [DATA]
dial to change the setting. You can press the [F4] button to preview
the effect.
Parameter Range
Q Mid1: 0.1 ~ 12
Mid2: 0.1 ~ 12
Freq Low: 32 ~ 1.0k
Mid1: 80 ~ 16.0k
Mid2: 80 ~ 16.0k
High: 1.0k ~ 18.0k
Gain Low: -12 ~ +12dB
Mid1: -12 ~ +12dB
Mid2: -12 ~ +12dB
High: -12 ~ +12dB
Description
Adjust the effect level.
Adjust the pitch.
Adjust the cent.
Adjust the output level.
Adjust the feedback level.
Description
Adjust the effect level.
Set the sampling frequency.
Set the LPF cutoff frequency.
Select the type of filter.
Adjust the resonance level of the LPF.
Description
Set the Q value of the two
mid-bands.
Set the center frequency of
the four bands.
Set the gain value of the four
bands.
Description
Adjust the effect level.
Set the LFO frequency.
Adjust the depth of modulation.
Set the cutoff frequency.
Adjust the resonance level.
Effect
EFFEC T
25